SERVER HPE P17079-B21 DL20 GEN10 RACK 1U XEON 4C E-2224 3.4GHZ 16GBDDR4 S100I 2X3.5 LFF HS NOHDD NOODD 2GLAN 1X290W G FINO:31/12

HPE ProLiant DL20 Gen10 Intel Xeon E-2224 Quad-Core (3.40GHz 8MB) 16GB (1 x 16GB) DDR4 2666MHz UDIMM 2 x Hot-Plug Large Form Factor Smart Carrier Dynamic Smart Array S100i SATA No Optical 290W 3yr Next Business Day Warranty

Struttura:
Rack 1U

Serie:
DL20 GEN10

Processore:
1 x Intel Xeon E-2224 Quad-Core (3.40GHz 8MB 71W) Processor

Numero di processori base:
1

Processori Max:
1

Numero di Core:
4

Cache Totale:
8MB

Chipset:
Intel® C242 Chipset

Memoria RAM base:
16GB (1 x 16GB) 2666MHz UDIMM

Memoria Base:
16GB

Memoria RAM max.:
64 GB - 4 x 16 GB UDIMM @ 2666 MT/s

Memory Protection:
ECC

Alloggiamenti RAM (totali/disponibilità):
4/3

Tipo disco fisso:
2 x Hot Plug 3.5in Large Form Factor Smart Carrier Hard Disk

Capacità Disco:
HDD Non Presente

Storage massimo configurabile:
Hot Plug LFF SAS HDD 24 TB - 2 x 12 TB
Hot Plug LFF SATA HDD 24 TB - 2 x 12 TB
Hot Plug LFF SAS SSD 1.6 TB - 2 x 800 GB
Hot Plug LFF SATA SSD 3.84 TB - 2 x 1.92 TB

Controller on board
1 x HPE Dynamic Smart Array S100i controller (RAID 0/1/5/10) SATA Only)**
Supporta RAID 0/1/1+0/5

1 x HPE FIO Enable Smart Array SW RAID 784308-B21 incluso

**NOTE: The S100i controller limited to SATA RAID 0/1/1+0/5. No Cache Option.
Per la gestione di HDD/SSD SAS è Necessaria l'aggiunta di un controller SAS
Il controller integrato non è supportato da vMware

Controller On Board:
SATA con RAID

Slot di espansione:
Primary FIO Low Profile Riser:
1 x PCIe 3.0 - Bus x8 - Connettore x8
1 x PCIe 3.0 - Bus x8 - Connettore x16

Flexible LOM Riser:
1 x PCIe 3.0 - Bus x8 - Connettore x8
1 x PCIe 3.0 - Bus x8 - Connettore x16

Scheda di rete:
Embedded 1GbE Dual Port 332i Network Adapter

Dispositivi:
******** OTTICO NON PRESENTE *******
Opzionale: SATA 9.5mm DVD-RW/DVD-ROM Optical Drive Cod 726537-B21/726536-B21

NB: Nel caso in cui si aggiunga dispositivo ottico è necessario anche:
P06681-B21 - HPE DL20 Gen10 LFF ODD Cable Kit
P06677-B21 - HPE DL20 Gen10 SFF ODD Enablement Kit

Interfacce:
Video 1 rear video connector
USB 5 USB ports (standard)
Frontali: 1xUSB 3.0 + 2x SUB iLO Service Port
Posteriori: 2xUSB 3.0
Interne: 1x USB 3.0

Graphica:
Integrated Matrox G200 video standard
• Video modes up to 1920 x 1200 @ 60 Hz (32 bpp)
16 MB Video Memory

HPE iLO 5 on system management memory
• 32 MB Flash
4 Gbit DDR3 with ECC protection

Alimentatore:
1 x HPE 290W FIO Power Supply Kit (Non HOT Swap, NON ridondabile)

BTU Rating:
Maximum 1130 BTU per hr (at 115 VAC) - 1126 BTU per hr (at 230 VAC)

Software certificato:
Windows Server 2016 (Most Recent Version)
VMware vSphere 6.7 and 6.5 U2
NOTE: VMware support is available on Intel Xeon E-Series processors only.
Red Hat Enterprise Linux (RHEL) 7.5
SUSE Linux Enterprise Server (SLES) 15 and 12 SP3

ClearOS/VM 7.5
NOTE: ClearOS allows you to build a fully functional server that is just right for you at no upfront cost. For more information on
ClearOS, please visit http://www.hpe.com/servers/clearos.

CentOS 7.5
NOTE: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server.
http://www.hpe.com/info/ossupport

Gestione del sistema:
HPE Integrated Lights-Out 5 (iLO 5) management processor (No Licence) / No OneView or Insight Control

Dimensioni:
(H x W x D)
4.32 x 43.46 x 38.22 cm

Peso::
7.88Kg Minimo
7.9Kg Massimo

Include anche:
HPE ProLiant LP FIO Riser Kit , 1U Short Friction Rail Kit

Temperatura operativa:
Standard Operating Support
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate of change may be limited by the type and number of options installed.

Umidità relativa:
Non-operating -30°C to 60°C (-22°F to 140°F) Maximum rate of change is 20°C/hr (36°F/hr).
Operating 8% to 90% - Relative humidity (Rh), 28°C maximum wet bulb temperature,non-condensing.

Periodo e tipo garanzia:
Garanzia pezzi per 3 anni/Manodopera per 3 anni/In sede il giorno lavorativo successivo per 3 anni

N.B.: Questa scheda è da ritenersi puramente informativa e non contiene alcun tipo di garanzia né implicita né esplicita